ETC Net3 Conductor Network Services Gateway Setup Guide - Manual

E T C
®
S e t u p G u i d e
Net3
®
Conductor Network Services Gateway
Net3 Conductor Setup Guide Page 1 of 4 Electronic Theatre Controls, Inc.
Corporate Headquarters  3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA  Tel +608 831 4116  Fax +608 836 1736
London, UK  Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK  Tel +44 (0)20 8896 1000  Fax +44 (0)20 8896 2000
Rome, IT  Via Pieve Torina, 48, 00156 Rome, Italy  Tel +39 (06) 32 111 683  Fax +44 (0) 20 8752 8486
Holzkirchen, DE

Ohmstrasse 3, 83607 Holzkirchen, Germany

Tel +49 (80 24) 47 00-0

Fax +49 (80 24) 47 00-3 00
Hong Kong  Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong  Tel +852 2799 1220  Fax +852 2799 9325
Service: (Americas) [email protected]

(UK) [email protected]

(DE) [email protected]

(Asia) [email protected]
Web: www.etcconnect.com  Copyright © 2014 ETC. All Rights Reserved.  Product information and specifications subject to change.
4266M2200  Rev B  Released 2014-01  ETC intends this document to be provided in its entirety.
Overview
Net3 Conductor Network Services Gateway provides powerful and flexible control for integrated lighting
systems. This setup guide will guide you through the setup of the Net3 Conductor including hardware,
electrical and data connections, unit power up, and connection to the built-in web interface.
Features
Net3 Conductor provides the following features:
• A central repository for all system configurations.
• Multiple network services for simple network lighting system integration.
• Logging of real-time errors.
• Reporting tools providing access to historical errors using user defined filters.
• Real-time logging and notification of system errors using e-mail or SMS messaging.
• Conductor is configured using the built-in web interface or its companion software, Net3 Concert.
Help from ETC Technical Services
• If you experience difficulty during setup or installation of the Net3 Conductor, additional
information is available from www.etcconnect.com or by contacting ETC Technical Services at
your local office listed on the first page of this document.
Setup and Connect
General Use
Net3 Conductor ships standard with non-slip padded feet for use on a table top. Alternatively, the unit
can be installed into a standard 19” rack enclosure when used with the included 1U Half Width Rack
Mount Kit (4260K1001).
N o t e : The Net3 Conductor unit must be mounted in a rack in a horizontal flat orientation, or
flat on a table top.