Euramco Safety VX700 - Manual (Page 7)

5.0 VX700 Uncrating When Trailer Mounted
1. Remove stretch-wrap and other packing materials from the VX700 Fan.
2. Remove tension straps between the VX700 trailer and shipping palette.
3. Remove two (2) threaded rods that anchor the trailer tongue to the palette.
4. Raise the trailer tongue and drop the tongue wheel down into a vertical position to support
the trailer.
5. Swing the tongue extension in line with the trailer and secure the tongue extension with the
clevis pen.
7. Set the emergency brake to the "ON" position. (Pull straight-up, over, and down until hand
brake locks down.
6. Solicit the aid of a fellow employee to ensure the trailer does not roll off the palette.
7. Remove wheel chocks and ramps.
8. Attach ramps to the fan side of the palette.
9. Release hand brake and carefully roll the VX700 trailer off of the palette.
10. Set the hand brake.
6.0 Vehicle Registration
The Vehicle Trailer Option if purchased needs to be registered with the motor vehicle agency in
your state. We will provide documentation and temporary registration upon delivery of vehicle that
allows limited operation.
Registration requirements vary from state to state and country to country. If purchased for use
outside of California, please consult the appropriate regulations for your location to the steps
necessary to secure permanent registration for street legal operation.
Page 6