EZWatch EZWatchIP 3.1 - Manual (Page 3)

Setting Up Internet Access Using EZWatch IP Service
Step #1:
First make sure the EZWatch Pro DVR/Camera Server has a connection to the internet. This can be DSL, Cable or Dial
Up. Make sure you are able to surf the web before moving to step 2.
Step #2:
Using the DVR/Camera Server, log on to our EZWatch IP web site at www.ezwatchip.com . Click on the Sign Up tab and
enter in your information following the steps. After you have entered all your information, click on the download link and
save the EZWatch IP Setup program to your computer. Be sure to remember where you saved this program so that you
can find it when you are ready to run the installation.
Step #3:
Once the software download is complete. Click on the EZWatchIP-
Setup.exe icon and click on Run to install the EZWatchIP software.
Follow the steps indicated. After you have completed the installation,
if the program doesn’t automatically open the sign on screen, then
click on the Red EZWatchIP icon on your desk top.
This will open the log in screen where you will enter the user name
and password you created when you signed up for the service. After
you enter your information simply click the Begin Update button and
you are finished. This will send the first communication to our IP
server and activate your account.
If you encountered any problems up to this point please call our tech support personnel for help 1-866-241-3400.
After you click the Begin Update button the login in screen will
disappear and our round red EZWatch IP icon will appear in your
task bar. This icon indicates the service is operating.
The EZWatchIP program will check every 30 minutes to see if your Public IP Address has changed. If it has, it will send
the new address to our system so that the domain name you created (test.ezwatchip.com for example) will now be
changed and allow you to access your system remotely.
Step #4:
Now that you have your EZWatchIP service up and running the next step is to configure the DVR so that you can access
it remotely. Following the steps on the next page will guide you through opening your ports on your router or modem so
that you can now use the system. Just remember when you go to your remote location(s) when it asks you to enter your
IP address you will instead enter your domain name you have created with EZWatchIP.