EZWatch EZWatchIP 3.1 - Manual (Page 7)

Connection Type: Leave this set to IP Address DVR IP Address: Insert your
internet IP address or your domain name. Port number: This should be set
to 1001 or the default. Auto connection is optional but not recommended.
Check this option, input your username and password if you want the
browser to log you in automatically from the remote site.
Click on “Generator” once completed. Then click ok, ok and ok. The
EzWebServer is now running. You should be able to access your system
remotely via the web browser.
Step #8: How to setup Remote desktop administration or the EzRSever. This section will assist you in setting up the
EzRServer so that you can have total control of your camera server from a remote location.
Click on Start, All Programs, EzWatchPro 3.0 HD, and click on
“Remote Control Server – EzRServer”. Check “Autorun EzRServer” so
that it will start automatically when the PC starts. (TCP/IP) Port: Leave
this set to the default port of 1901 Password: Choose a password Click
on ok to exit and leave the program running.
Step #9 How to access your camera system remotely using
EzNetwork 3.0 This section will give you a brief overview of how to
use EzNetwork 3.0 to view your cameras and to do desktop
administration. You should be at a remote computer or location for
these steps. Installation: EzNetwork 3.0 can be found on your
EZWatchPro installation CD. You will need to install this and the
Access Runtime “Database” components on your remote PC for the
software to function. Once EzNetwork 3.0 has been successfully
installed, you can click on the icon on your desktop that says “Remote-
Viewer EzNetwork 3.0 to start the program.
To connect to your camera server, click on the “Connect to local site”
button located on the bottom right
of your screen.
These are the required steps to make a connection. Site name: You must input a site name. It doesn’t matter what You
decide to name it. IP Address: Input your internet IP address or domain name for your camera server. Leave the TCP/IP
at the default port 1001 Input your user name and password from EzWatchPro Surveillance Server. The default user
name is “root” and the Default password is “123”. Play with: You have 3 choices: