EZWatch EZWatchIP 3.1 - Manual (Page 9)

Step #10 How to access your camera server via Internet Explorer.
To access your system via Internet Explorer, simply Input your internet IP address or domain name into The address bar.
You can use the following format: For IP address:
http://64.50.125.201:8000/demo.htm For domain:
http://mydomain.ezwatchip.com/demo.htm Note: When typing in the IP address you can use colon and then your listening
port number, either 80 or 8000. Once connected properly you should get the demo.htm page similar to the picture on the
left. The web browser Will need to install some ActiveX controls for the Interface. It will either prompt you to install these
or install automatically. If you are having problems viewing, you will need to adjust you security settings in Internet
Explorer. To do this, do the following: Go to tools, internet options, security, and then to custom level.
The fist seven options are for ActiveX controls. Enable all Seven of them and then click ok.
Now that you have demo.htm page fully displayed, you can click on “connect to local site” This icon is the one the IE logo
and computer. The screen that pops up should look like the one here to the left. You can fill out this box just like the one
from EzNetwork 3.0. Click on connect once you are finished. You should be able to select and view all of your cameras.
For Technical Support on any of the above, feel free to contact our Seasoned Support Staff for
any questions or concerns you may have. Technical Support Toll Free: 866-241-3400