Heidolph Incubator 1000 - Manual (Page 16)

16
E
STANDARD HARDWARE & OPTIONS
product quantity P/N
230/240V 50/60Hz
P/N
115V 50/60Hz
INCUBATOR 1000
heater module 1 549-90010-00 549-90020-00
with incubator hood, flat, consisting
of: upper half, lower half,
deflector plate, flat 1 549-90040-00
549-90040-00
or incubator hood, high, consisting
of: upper half, lower half,
deflector plate, high optional 549-90030-00 549-90030-00
holder 1 21-005-014-48 21-005-014-48
screw
(to secure holder) 2 02-01-04-02-24
02-01-04-02-24
spring washer
(to secure holder) 2 02-03-01-01-09 02-03-01-01-09
knurled bolt (to secure lower half
of hood) 3 11-008-003-99
11-008-003-99
Deflector plate 1 23-08-02-04-04 23-08-02-04-04
or Deflector plate 1 23-08-02-04-03 23-08-02-04-03
Instruction Manual 1 01-005-004-23 01-005-004-23
Power cord 1 14-007-003-81 14-007-003-89
GENERAL INFORMATION
Unpack your item carefully.
Inspect for damage and report such damage or missing parts to your supplier right
away.
Read your Instruction Manual carefully. Take time to save time when working with
your product. Make sure that every user has read and understood the Instruction
Manual.
Please store the Instruction Manual in a place easily accessible to every user.
IF ALL ELSE FAILS, READ THESE INSTRUCTIONS !
A so-called EURO-plug (DIN 49441 CEE 7/VII 10/ 16 A 250 V) is standard on all of
the products.
For the Continental US they feature a US-standard plug (NEMA Pub.No.WDI.1961
ASA C 73.1 . 1961 page 8 15A 125V).
For using the item in a country with deviating outlet / plug systems, we recommend
to use approved adapters or to have an electrician replace the standard plug with
one suiting your needs.
As shipped, the item features a protective ground wire. When replacing the original
plug, make sure to reconnect this protective ground wire in the new plug !