INCRA Mast-R-Lift II - Manual (Page 3)

Porter Cable 7518 A1
Porter Cable 690/890, Bosch 1617/1618, DeWalt
610/618, Craftsman 17543/17540/28190 F4
Makita 1101 C1
Hitachi M12VC/KM12VC E2
Milwaukee 5626 D3
Milwaukee 5615/5616/5619 G3
Rigid R29302 B1
Figure 4 Figure 3
Carriage Clamping Block
ROUTER CHART
2. Locate your router on the chart below.
3. Align the letter and number associated with your router (Figures 3 and Figure 4)
and reinsert and tighten the ¼- x 1-1/2” Shoulder Bolt you removed in step 2.
4. Repeat this for all four carriage clamping blocks