Bacharach 3015-4286 - Manual (Page 10)

Single Zone Gas Monitor
6 P/N: 3015-4256 Rev 13
Category General Single Zone Specifications
Coverage Single zone
Detector Type Infrared, Non-Dispersive
Warm-up Time 15 minutes
Front Panel
3 Indicator lights:
• Green Monitor is powered on. LED glows during normal operation; flashes
when unit is in warm-up mode
• Red
Alarm. LED flashes when any point has exceeded the alarm setting.
• Yellow Fault. LED flashes when there is a system fault
Size (HxWxD) 7.5" x 13.5" x 3.625" (190.5 mm x 343 mm x 92 mm)
Weight 5.5 lbs (2.5 kg)
Temperature Drift Less than 1 ppm per °C between purge cycles
Sampling Mode Automatic (continuous)
Re-Zero Automatic (approximately every 5 minutes)
System Noise Less than 50 dB(A) @ 10 feet (3m)
Monitoring Distance 500 ft. (152 m) maximum
Conditioned Signal 4-20 mA DC non-isolated output (ppm)
Alarms
Four SPDT alarm contacts are provided rated 2A at 250 VAC (inductive), 5 A at
250 VAC (resistive)
Three assigned to PPM level alarms, one assigned to system faults
Power Safety Mode Fully automatic system reset. All programmed parameters retained.
Operating Temp 32 to 122 °F (0 to 50 °C)
Ambient Humidity 5% to 90% RH (non-condensing)
AC Power 100 to 240 VAC, 50/60 Hz, 15 Watts
Certification UL 61010-1, CAN/CSA 22.2 No. 61010-1 and CE Mark
Warranty 2 years from date of shipment
Altitude Limit 6,562 ft (2,000 m) maximum
Sensor Life 7-10 years