Aastra Telecom 9133i (USER GUIDE) - Manual (Page 22)

16 9133i IP Phone User Guide
Progra
mmabl
e Keys
Configuring Park/Pickup
Use the following procedure to
configure park/pickup on the 9112i
phone.
1. Click on Operation->
Programmable Keys and XML.
.
2. Pick a programmable key to
configure for parking a call and
picking up a call.
3. In the "Type" field, select Park.
Select Pickup for the other pro-
grammable key.
4. In the "Value" fields, enter the
approriate values based on the
server in your network.
Note: For values to enter in this field,
see the table "Park/Pickup Call
Server Configuration Values" on
page 15 .
5. In the "Line" field, select the
lines for which to apply the Park
and pickup configuration.
6. Click to save your
changes.
7. Click on Operation->Reset.
8. In the "Restart Phone" field
click to restart the IP
phone.
Using the Park Call/Pickup
Parked Call Feature
Use the following procedure on the
IP phone to park a call and pick up
a parked call.
Park a Call
1. While on a live call, press the
"Park" softkey.
2. Perform the following for your
specific server:
If the call is parked successfully,
the response is either a greeting
voice confirming that the call
was parked, or a hang up
occurs. The parked call party
will get music on hold.
3. If the call fails, you can pick up
the call (using the next proce-
dure) and press the "Park" soft-
key again to retry step 2.
Aastra Web UI
For Asterisk Server
- Server announces the extension
number where the call has been
parked. Once the call is parked,
press the
N key to complete
parking.
For BroadWorks Server
- After you hear the greeting from
the CallPark server, enter the
extension where you want to park
the call.
For Sylnatro Server
- Enter the extension number where
you want to park the call, followed
by "#" key.
For ININ Server
- Enter the extension number where
you want to park the call, followed
by "#" key.