I.R.I.S. 565 User Manual
Page 14
Camera Memory Tours - Setting Up.
To set up each tour, first press the appropriate Set-Up key from the Camera Tours page (above). Next,
select the appropriate key (1 to 10) for the position you wish to store. You will then be taken to the
Camera Tour Control Page (shown below) from which you can drive the camera to the desired
position.
Once you have moved the camera to the desired position, press the ADD key to learn that position.
To delete a position that is already stored in memory, select the desired position from the List and
when the Camera Tour Control Page is displayed, press the ERASE key.
The GOTO button on the Camera Tour Control Page can be used to send the camera to the selected
position to remind you of that position.
Version 1.00. March 2012. ©Iris Innovations Limited.
Select Position 1 - 10
Back to Main Menu
Back to Main Menu
ADD Position
GOTO Currently
stored position
ERASE Current Position