I.R.I.S. 808 Digital Video Recorder - Manual (Page 126)

Alarm outputs 1-2 (GREEN for normal state, RED for triggered state) for the selected
DVR. For Administrator, click on any of these icons to control the corresponding
alarm output from normal to triggered, or from triggered back to normal.
Click on this icon to call up Search-by-time dialog. Please select the time (Year,
Month, Date, Hour, and Minute) and recorded video/audio type (Alarm, Motion,
Video Loss, and Normal) to search for playback. Click on Search button to start the
search of the recorded video/audio. (If it failed, the result will be shown on the title
of the dialog.) Now, you may use the playback buttons to play the recorded video/
audio. Please note that there must be some cameras in playback mode for the
search to succeed.
Click on this icon to call up Search-by-event dialog. The event logs will be shown on
the screen. Please select the DVR device, event type, and source ID to search for the
event logs. Click on Refresh, Up, or Down to update the event logs. Click on the
desired event log to highlight and select it. Click on the OK button to search the
recorded video/audio for the highlighted event log. Now, you may use the playback
buttons to play the recorded video/audio.
Click on this icon to call up search-PC-video dialog. Please select the file(s) , and
then click on Open. Now, you may use the playback buttons to play the recorded
video/audio in the file(s).
Click on this icon to show/hide full PTZ control panel. The user can click on the PTZ
Panel (but outside of any object in it) (to call up the Context menu) to move it.
126