I.R.I.S. 808 Digital Video Recorder - Manual (Page 43)

5.4 Backup Device
In Menu display, press ▲▼◄► to change the highlighted option to Backup Device,
and then press ENTER to call up Backup Device display as shown below.
The system supports SD card and a variety of USB 2.0 storage devices , including
Storage Disk Drives and DVD Disc (including DVD+RW, DVD+R, and DVD-R).
(DVD-RW is not supported.) The operations are as below:
 ▲▼◄►
Press these buttons to select the items.
 MENU/ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to previous display.
 Connect/Disconnect – If the backup device is disconnected (as shown in Current
Status), please plug the device in one of the backup ports (USB or SD) and/or
insert a DVD for DVD device, and then press ENTER
(Mouse: Left click) to
command the system to connect with it. If the device is already connected (EX.
R/W - Read/write, as shown in Current Status), please press ENTER
(Mouse:
Left click) to command the system software to disconnect with the device, and
then unplug the device from the backup port.
Note 1: DO NOT format the DVD disc for better performance and compatibility.
Note 2: Before using USB pen drive, please format it to FAT32 file system by
MS-Windows; for SD card, please format it to FAT file system.
Note 3: The backup device has to be connected by the system software before it
can be used to read/write. If it failed to connect, please unplug the
device, and then plug the device in the USB port again.
Note 4: Some backup devices may have compatibility problems. Please contact
your local dealer or installer for the supported devices.
Note 5: Please DO NOT unplug the backup device when it’s connected, or the
system may become abnormal or even hang up.
43