Jabra BIZ 2400 USB User Manual - Manual (Page 5)

5
how to connect heaDset to Pc
Plug the headset directly into a free USB port on your PC. Once connected, the headset's mute and hookswitch
buttons will be illuminated.
The first time connected, your PC displays a small pop-up message in the task bar to indicate that a new device
has been found. You are now ready to use the headset.
how to wear the Duo anD mono heaDset
Adjust the headband length.
The headband is adjustable in length to fit the size of your head. Push or pull the top
section of the headband until the headset fits comfortably.
Wear the headset.
duo: Position one speaker over each ear with the
band going over the top of your head, just as with a
traditional pair of headphones.
mono: Place the headband over your head, with
the headset positioned against your preferred
ear and the T-bar positioned just above the
opposite ear. Adjust the headband for optimal
fit on your head.
position the microphone.
Adjust the microphone by rotating it around the headset and flexing the boom arm until it is positioned less
than 2 cm (3/4") from your mouth.
.
how to rotate the boom arm.
The boom is free to rotate 360
o
how to attach the ear cushion.
Align the ear cushion against the neckband ear plate so that the groove in the ear cushion slips around the ridge
of the ear plate. Rotating the cushion will ensure it snaps securely into place (you can remove it as you attach it).
wearing the mono heaDset with the heaDbanD
The mono Jabra BIZ TM 2400 model include a headband.
how to remove the headband
Remove the ear cushion by gently pulling it off the ear-plate. Push on the inner part with your thumb until the
headset clicks out of the headband.