4 operation – JUMO PCA Communications Software PCC (B 70.9702.0) User Manual
Page 21
Advertising
21
4 Operation
Device type
(device)
Right click or double click a device to change all the settings for the device. If
the function “Use the Assistant for device settings” is active, then all the
settings will be requested, one after another. If the Assistant is not active, you
will have to call up the various settings dialogs by hand.
v Chapter 5.2 "Adding devices"
v Chapter 8.2.2 "Device Type"
Device type
(parameter)
You can right click or double click a parameter to change a particular setting
for the device (the Assistant for device settings doesn’t matter in this case).
Advertising