Brinkmann Sl 7 - Manual (Page 3)

PARTS LIST:
Home Security Main Housing
Main Housing Mounting Screws (2)
Solar Panel Module with Cord
Solar Panel Module Mounting Screws (3)
SL-7 Owner’s Manual
2
ASSEMBLY INSTRUCTIONS
Inspect contents of the box to ensure all parts are included and undamaged.
A Phillips screwdriver will be required.
1
2
3
4
5
Step 1
Select a location and attach the main housing
where you want to detect persons or objects
moving at night. Ideal places are patios, side
doors, garages and pool area. Mount the main
housing 6 to 8 feet above ground on a solid
surface for best motion detection and light
distribution.
Note: Do not place the main housing in high
traffic areas. Doing so will discharge the
battery quickly and unit will shut down
until it is recharged by the sun. Aim the
motion detector away from streets,
busy walk areas, trees and bushes.
Step 2
To attach the main housing, use the mounting
template in this manual to install the two main
housing mounting screws. The screw heads
must stand out from the surface by about
5/32”. This is about the thickness of two
quarters or two nickels.
3
4
1
2
Template on
back of manual
INSTR_821-7000-0_SL7.qxd 5/17/06 4:29 PM Page 3