KD Scientific Legato OEM 950 - Manual (Page 23)

23
Appendices
K
D
S
L
e
g
a
to
9
5
0
O
E
M
S
e
ri
e
s
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 950 OEM Series Syringe Pump User’s Manual
Publication 5617-012 Rev A
Utilizing the USB Interface
Pin # Signal
1 +5V
2 - Data
3 + Data
4 GND
Mating Face
USB VIRTUAL COMMPORT DRIVER INSTALL ATION
When you connect the KDS Legato 950 OEM Series
pump to a computer via USB for the first time, Windows
will seek to install a driver for communication. The
following section details the installation of the Virtual
CommPort Driver supplied with the KDS Legato 950
OEM Series Pump.
1. Connect the pump to the computer via USB.
Open the control panel and select System and
Security and then System. Click Device
Manager on the left hand menu.
2. Two Flash Update Applications will be
displayed in the device manager, under Other
Devices. Right click on either of the flash
update applications and select Update Driver
Software.
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com