Koolance EX2-755-R - Manual (Page 9)

10 11 User Manual
Install the Slot Adapter into any available rear
card slot in your computer.
Screw the Slot Adapter in place as you would
a normal device.
From the rear of the case, carefully feed
both ends of the liquid tubing through the
Slot Adapter and into the chassis.
Plug the other end of the Exos’ external
power cable into the Slot Adapter.
Installing the Slot Adapter
Installation
Power Connection
The cooling system requires 12V DC up to approximately 30W. Since it’s adapted
internally, it does not use a separate AC outlet when powered by a computer. (See
AC power option later.)
Connect the Slot Adapter’s main power plug to a computer power supply 4-pin
Molex plug. Without this important connection, the unit will NOT operate.
CAUTION : The Power Connection is vital to system operation. A 12V
4-pin plug from the power supply must remain connected to the cooling
system at all times while the computer is in use.
!