Koolance ICM-505 - Manual (Page 15)

10
Installing the ICM-505
Sensor - The Koolance temperature probe is connected here. The sensor end will
be taped to the bottom of the CPU Cooler during installation later (see CPU Cooler
for more information).
ATX - The “pass-through” ATX lead simulates the chassis’ power button in the
event that automatic shutdown becomes necessary. Connect the single end to
the ICM-505. The dual ends connect with the chassis main power switch, and to
the motherboard. In all instances, direction or polarity of the ATX wire does not
matter.
Plug the remaining female ATX
power lead from the ICM-505 to
the motherboard’s power switch
connection. (This is often marked
“PWRSW”, “PWSW”, or “PWBT”).
CAUTION : The auto shutdown safety features of your ICM-505 will not
function without properly connecting the ATX power switch lead.
!
Display - The optional LED temperature display (sold separately) is plugged to the
connection marked “Display” (see LED Display Panel for more information).
Plug your computer’s main power
switch to the male ATX power lead
from the ICM-505.