Koolance ICM-505 - Manual (Page 19)

14
Installing the CPU Cooler
Temperature Sensor
Remove the protective fi lm from the bottom of
the CPU cooler.
Insert the temperature sensor into either
bottom groove on the CPU cooler. The sensor
is required for proper fan speed control and
system safety features.
DO NOT attempt to install the temperature
probe in between the processor and cooler.
Despite its thin size, it will interfere with CPU
contact or burn-out the sensor.
Apply metal tape to keep the temperature probe in
place. DO NOT stick metal tape or the temperature
probe to the the raised (polished) portion of the
CPU cold plate.
You can use a zip-tie to further secure the
temperature probe wire to the CPU tubing.
CAUTION: Be sure to attach the Koolance temperature probe to the
CPU cooler during installation. The safety features of your system may
not function properly without the correct placement of this probe, and
hardware damage can result.
!