Koolance ICM-510 - Manual (Page 13)

8
Installing the ICM-510
Mounting the ICM-510
The ICM-510 mounts via a rear
120mm fan grill. If you already
have a 120mm fan installed in your
computer, Koolance recommends
removing the fan and utilizing the one
included with the ICM-510 to ensure
variable voltage compatibility.
The fan mounting bracket is adjustable
up to 2.5cm (1 in.) vertically with two side
screws. This allows the ICM-510 to adapt
to different grill locations, and to help avoid
confl ict with video cards.
Depending on the installed direction of the
ICM-510, it may be necessary to adjust
these screws before mounting the cooling
unit.
The ICM-510 is hinged to allow access to
components behind it, and to simplify maintenance
(see Filling & Maintenance).