Koolance ICM-510 - Manual (Page 23)

18
Installing the CPU Cooler
AMD Socket 939, 754, & 940 Processors
The AMD 64 Adapter is designed for AMD Athlon
64, FX, and Opteron processors in socket 754,
940, and 939 formats. The motherboard may need
to be removed from the chassis in order to install
this device.
Various hardware comes with the Koolance
AMD 64 Kit, and depending on your particular
motherboard, some of it may not be required.
AMD 64-bit boards have 2 primary mounting holes
which the Adapter will use.
Bracket
Clips
Plastic Spacers
Nuts
Long
Screws
Short Screws
Remove the black plastic
r e t e n t i o n f r a m e f r o m t h e
motherboard. Generally, this
is held in place with 2 metal
screws.
(If there are plastic tabs instead
of screws, please skip to the
next paragraph.)
For motherboards with plastic
tabs instead of metal screws,
turn the motherboard over
and push the center locking
bolt inward with a small fl at
screw driver.