Power connection – Koolance PC3-736SL User Manual
Page 13
Advertising
8
Power Connection
You may begin the installation of your Koolance system by mounting a power supply
in the chassis. The liquid cooling system requires approximately 11-17W from any
standard ATX power supply.
Connect a 12 Volt 4-pin Molex plug from the power supply to the Power Connection
underneath the Radiator. Without this important connection, the cooling system will
NOT operate.
CAUTION
:
The Power Connection is vital to system operation. A 12V
4-pin plug from the power supply must remain connected to the cooling
system at all times while the computer is in use.
Connecting PC3-700 Systems
!
Advertising