Koolance PC3-736SL - Manual (Page 19)

14
Hose Lengths
Remove the threaded compression
fi ttings from both radiator nozzles
inside the case and attach the
supplied 10mm (3/8”) tubing to
each radiator nozzle.
Before installing your liquid coolers, appropriate lengths of tubing must be cut to
connect each device. It may be easier to temporarily lay your motherboard and
video card inside the case to better-estimate the required amounts.
The nozzle farthest away from you (on
the motherboard side) is the outlet of
the radiator, with the nearest being the
inlet.
Generally, the outlet will connect fi rst with
your CPU Cooler.
Connecting PC3-700 Systems
With the connected outlet hose, roughly
estimate the length you will need to your
fi rst cooler, and cut it.
Cut the second hose with enough length
to connect with the last cooler that will be
in your system.
Using the leftover tubing, cut shorter
pieces to link between each individual
cooler.