Koolance RP-980SL - Manual (Page 14)

9 User Manual
CAUTION :
The Power Connection is vital to system operation. A 12V
4-pin plug from the power supply must remain connected to the cooling
system at all times while the computer is in use.
!
ATX Power Switch
The ATX “pass through” lead is responsible for shutting off your computer if any
temperature sensor reaches 3ºC (5ºF) above the preset alarm temperature (See
LED Display
for alarm confi guration).
Connect the male ATX power lead from
the PC4-1000 to the chassis main power
switch.
During motherboard installation, connect
the female ATX power lead from the PC4-
1000 to the motherboard’s power switch
connection (often marked “PWRSW”,
“PWSW”, or “PWBT”).
This is the connection that would normally
receive the chassis power switch lead
directly.
CAUTION :
The auto shutdown safety features of your PC4-1000 will
not function properly without connecting the ATX power switch lead.
!