Koolance TMS-EB200 - Manual (Page 3)

Koolance TMS-200 Installation Guide
v1.02
3
Software Installation
After connecting all wires to the TMS board and mounting it within the
computer case, power-up the computer. Launch the TMS executable
installation fi le for your OS (Windows Vista or XP). The USB plug should
still remain disconnected from the computer at this time.
Select the features you would like to install. The PL-2303 Drivers will be
necessary for the TMS software to communicate with the hardware card.
Use the appropriate TMS installation fi le for your operating system: XP or
Vista. (NOTE: Windows XP 64-bit users must install separate PL-2303
drivers. These will be placed under /x64/ in the TMS folder after installation,
and must be installed after TMS using Windows Device Manager.)
If you accept the license terms, select “I Agree”.
Select the desired hard drive installation location for TMS-200.
If PL-2303 drivers
were selected,
you will now be
prompted to install
these.