Optional coil tine – Landoll FPSBT-6 Food Plot Seeder User Manual
Page 24
Advertising
3-4
2P102
ASSEMBLY
Optional Coil Tine
1.
Install into each Frame End Plates lower 21/32" hole
a 5/8-11 x 1-3/4" Capscrew, four Flat Washers and
Lock Nut. See Figure 3-5.
2.
Assemble RH and LH Coil Tine Brackets into Frame
End Plates upper 21/32" hole with 5/8-11 x 1-3/4
Capscrews, Flat Washer and Lock Nut.
3.
Attach Pipe and Tine Assembly to Brackets with
Clamp, 1/2-13 x 1-1/2 Capscrew, and Lock Nut.
Figure 3-5: Coil Tine Setup
Advertising
This manual is related to the following products: