Procedure in the event of a malfunction, Cleaning the hob surround – Bosch Hot Plate User Manual
Page 23
23
Use the glass scraper to remove food residues and
grease splashes.
Use a cleaning product and kitchen towel to clean the
surface when it is luke warm. If the surface is still too
hot it can become stained.
Wipe the surface and rub dry with a soft cloth.
Discoloration is caused by pan abrasion or the use of
unsuitable cleaning agents. This is very difficult to
remove. Use Hob Clean or Sidol for ceran + steel. Our
afterĆsales service can remove discoloration, but will
charge for this service.
Always keep the control panels clean and dry. Food
residues and spills can impair the function of the
control panels.
Only use warm soapy water.
Do not use anything which is sharp or abrasive. The
glass scraper is unsuitable. The hob surround could
be damaged.
Neither lemon juice nor vinegar should be used for
cleaning the hob surround.
This could result in matt patches.
Procedure in the event of a malfunction
Malfunctions often have simple explanations and may
be easily rectified. Please read the following
instructions before calling the afterĆsales service.
Make sure that the power draw of all the appliances
switched on does not exceed your maximum
household electricity supply. Check whether the
circuit breaker triggers when you switch on another
hotplate.
How to clean the glass
ceramic cooking surface
Shimmering metallic
discoloration
Control panels
Cleaning the hob
surround
The circuit breaker in your
household electrical circuit
trips when you switch on
the hob