Broadband Products PC5220 - Manual (Page 8)

II. Installing the Mobile Connection Manager and PC5220 on Your Laptop PC
Installation Precautions
WARNING: DO NOT insert the PC5220 before you install the Mobile Connection
Manager software onto your Laptop PC. Once you install the Mobile Connection
Manager software, you will be prompted to insert the PC5220 into the Type II PC Card
slot.
WARNING: Once the card is inserted, do not physically remove the PC5220 from
the PC Card slot until you have completed the Unplug/Eject process. Removing the
card improperly may cause a fatal error to your PC.
Note:
If you have a previous version of the Mobile Connection Manager application installed
on your Laptop PC, you will need to remove the application by utilizing the
Add/Remove Programs Windows utility. Once removed, proceed with the installation
procedures of the current version located on your Installation CD.
Uninstalling the Mobile Connection Manager software:
Windows XP
1. Go to: Start>Control Panel>Add/Remove Programs
2. Select Mobile Connection Manager and click Change/Remove
3. Next select Remove and click OK to proceed when prompted
4. You will need to restart your Laptop PC in order to complete the uninstall
Windows 2000
1. Go to: Start>Settings>Control Panel>Add/Remove Programs
2. Select Mobile Connection Manager and click Change/Remove
3. Next select Remove and click OK to proceed when prompted
4. You will need to restart your Laptop PC in order to complete the uninstall
Windows 98 and ME
1. Go to: Start>Settings>Control Panel>Add/Remove Programs
2. Select Mobile Connection Manager and click Add/Remove
3. Next click OK to proceed when prompted
4. You will need to restart your Laptop PC in order to complete the uninstall
5