BenQ P51 - Manual (Page 86)

74 Microsoft ActiveSync
To set up Push Mail:
1. Connect to an existing modem connection such as GPRS.
2. Tap Start > Programs > ActiveSync .
3. Tap Menu > Add Server Source .
4. Enter the address of your Outlook Web Access server and uncheck This server requires an
encrypted (SSL) connection . Then tap Next .
5. Enter your user name, password and domain name. Then tap Next .
6. Choose the data types you want to synchronise.
7. Synchronisation now starts. Wait for a while to receive mails.
Tap Menu > Schedule to customise the synchronisation interval as needed.
Connect to ActiveSync using Bluetooth®
Without a data cable, you can still connect your PDA phone to a computer supporting
Bluetooth® (either built-in or with a Bluetooth® dongle).
• The computer must use Windows XP Service Pack 2.
• If you are using a Bluetooth® dongle, use the default driver that comes with Windows XP.
To set up a Bluetooth® connection between a computer and your PDA phone:
1. On the computer, right-click the Bluetooth® icon on the Notification area of Windows XP (or
click Start > Control Panel > Bluetooth Device ) to open the Bluetooth Device window.
2. On the Options tab, select Turn discovery on and Allow Bluetooth devices to connect to
this computer.
3. On the COM Ports tab, click Add .
4. Select Incoming (device initiates the connection) and click OK .
5. Note down the number of the COM port that was added. It is recommended that the COM
port number is less than 10.
6. Click OK .
7. In ActiveSync on the computer, click File > Connection Settings .