Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 483)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 481
12.27.9 Insert action association
Symbol:
This command (category 'SFC') is used in the SFC-Editor to associate an action to a step.
Select the desired step and perform the command. The action box will be inserted
right to the step box.
If already one or several action(s) are associated to a step, the new action element will
be placed
- as first action (upper position) for the step, if the step has been selected when
performing the insert command
- directly before the action, which was selected when performing the insert command.
See also Insert action association after.
The left part of an action box contains the action qualifier, by default "N", in the right
part an action name must be entered. For this purpose click on the field to open an
edit frame. The action must be available in the project. See 'Add Object' for creating a
new action.
The qualifier also can be edited inline.
Abb. 254 Actions associated to a step, examples
12.27.10 Insert action association after
Symbol:
This command (category 'SFC') is used in the SFC-Editor to associate a further action to
a step after an existing one.
Select the desired step and perform the command. The action box will be inserted
right to the step box.
If already one or several action(s) are associated to a step, the new action element will
be placed
- as last action (lowest position) associated to the step, if the step was selected when
performing the insert command
- directly after the action, which was selected when performing the insert command.
See also and for a picture of examples: Insert action association.