1 about this documentation, About this documentation, Control technology | ipc backup & restore – Lenze Backup + Restore__Backup+Restore (PC-based) User Manual
Page 4: 1about this documentation
Control technology | IPC Backup & Restore
About this documentation
4
L
1.6 EN - 01/2011
1
About this documentation
This documentation contains information on the parameterisation and configuration of
industrial PCs. The "PC-based automation" supports industrial PCs of the following device
series:
EL 1800 - EL 9800,
CS 5800 - CS 9800,
CPC 2800.
The industrial PCs are available with the following software equipment:
Industrial PC as component, on request, with operating system, without additional
software
Industrial PC as visualisation system
Industrial PC as control and visualisation system
Depending on the software equipment acquired, some chapters of this Manual may be
irrelevant to you.
This Manual is part of the "PC-based Automation" manual collection which consists of the
following documentation:
Documentation
Subject
System manuals
PC-based Automation
• Control technology - system structure & configuration
• Visualisation - system structure & components
Communication manuals
PC-based Automation
• CANopen control technology
• EtherCAT control technology
• PROFIBUS control technology
(Software) manual
PC-based Automation
• Industrial PC - Parameterisation & Configuration
Operating Instructions
Embedded Line Panel PC
• EL x800 - Panel PC with TFT display
Operating Instructions
Command Station
• CS x800 - Stand-alone operator terminal
Operating Instructions
Control Cabinet PC
• CPC 2800 - Control cabinet PC
Operating Instructions
HMI EL 100
• EL 1xx - HMI with Windows
®
CE
Further software manuals
• Global Drive Control (GDC)
• IPC as gateway - Parameterisation & Configuration
• »Engineer«
• »PLC Designer« / »PLC Designer - SoftMotion« / »PLC Designer - CANopen
for runtime systems«
• »VisiWinNET® Smart«