Loadstar Sensors StockVUE Inventory Management System - Manual (Page 3)

•
Loadstar Sensors, Inc. • www.loadstarsensors.com
3
Plug in the power supply module to DC-IN of the SC-1200 and power up. Verify that the green LEDs
are lit.
Identify the parts that you want to monitor. Using a weigh scale measure the weight of each part as
accurately as possible. If you have small parts, you should use a lot of them, preferably about 50%
of bin capacity, to compute the weight. Currently StockVUE accepts only pound units.
Make sure all the bins are empty before you proceed to Step 2 below.
2. Windows Application – StockVUE Client
Install StockVUE using the CD or the link provided. A shortcut will be added to the desktop.