Longevity ARCMATE 205 - Manual (Page 24)

160/205 MIG Welder/ARC Welder
Page 23 of 37
www.longevity-inc.com
Setting Up Argon Regulator:
The argon regulator pictured below is a standard size regulator for most argon tank setups.
Setting it up to your argon bottle is easy. Simply screw in the valve fitting securely to the gas
bottle. Secure your hose to the outlet of the regulator using a proper hose clamp. Set the pressure
regulator adjustment between 15-25 cubic feet per hour depending on welding conditions. Use
higher flow when extending the welding wire to reach into corners or gaps. We recommend
about 18 CFM for normal operating conditions.