MBT Lighting LEDPAR64PRO (SRL-6057SB) - Manual (Page 3)

LEDPAR64PRO
3
Part I General Information
1.1 Introduction
You have purchased the LEDPAR64PRO, High Power LED Par Lamp series product. To assure
reliable performance, please read the instructions in this manual thoroughly and carefully before
operating.
1.2 Safety Information
The following definitions of identifying the severity of the hazards associated with the
products are used:
“DANGER” Imminently hazardous situation which, if not avoided, will cause death or
serious injury.
“WARNING” Potentially hazardous situation which, if not avoided, could cause death or
serious injury.
“CAUTION” Potentially hazardous situation which, if not avoided, may cause minor or
moderate injury or property damage. In addition, it uses to alert against
unsafe practice.
Ignoring a Hazard will make void any Warranty
Danger : Ensure that main power supply is off before installing, wiring, or servicing this
product.
Danger : This Product must be installed by a qualified electrician in accordance with NEC and
relevant local codes.
Warning : Do not attempt to install or use this product until you read and understand the
installation instructions and safety labels.
Warning : Do not use this product if the power cables are damaged.
Warning : Whenever indicated by a Structural Engineer and/or local codes, install safety
cables to this product.
Warning : Ensure that the Safety Cables comply with the specifications given in this user
manual.
Caution : This product has no serviceable parts inside. Do not attempt to open the fixture.
Note : The instructions and precautions in this user manual are or maybe not necessarily
applicable, or relevant to all applications. Neo-Neon cannot anticipate all possible applications
or use of this product.
Owner/User Responsibilities
The contractor, installer, purchaser, owner, and user is solely responsible to install, maintain
and operate this product in such a way as to comply with all state and local laws, ordinances,
regulations.