MBT Lighting LEDPAR64PRO (SRL-6057SB) User Manual
Page 9
LEDPAR64PRO
9
PART II Installation and Operation (continued)
A. DMX mode:
To have the fixture working in DMX mode, please toggle on the dipswitch #10 of Group1
as illustrates in below figure:
1. DMX channels 1,2,3,5 functions are determined by the current settings of channel 4.
For example, while channel 4 is set between 0 and 28,
Channel 1 will control the Red LEDs,
Channel 2 will control the Green LEDs,
Channel 3 will control the Blue LEDs.
While channel 4 is set more than 28,
Channel 5 will control the speed of the Auto program.
2. Channel 6 is not determined by channel 4.
Channel
Value
Function
CH1
CH2
CH3
CH5
4
000~028
RGB Control Mode
Red
000→255
Green
000→255
Blue
000→255
No Function
000→255
029~056
Program 1
No
Function
No
Function
No
Function
Adjusts the
auto
program
speed
( the fastest
0.4s,
the slowest
2.5s)
057~084
Program 2
085~112
Program 3
113~140
Program 4
141~168
Program 5
169~196
Program 6
197~224
Program 7
225~255
Program 8
CH6 0~10
No
Strobe
11~255
Higher the value quicker the Strobe rate
B. M/S mode
To work in M/S mode, you should designate one fixture as master mode and the rest as
slave mode. By switching the dipswitch #1of Group 2 off, you set this fixture to master
mode. By switching the dipswitch #1 of Group 2 on, you set this fixture to slave mode as
the way you set it to DMX mode.