Memmert CELSIUS 10 FDA - Manual (Page 15)

15
CELSIUS 10 FDA-Edition
9. In the next window, select the
programme components/drivers that
should be installed:
►
Select "CELSIUS 10.0" if you only
want to install the programme itself.
►
Also select "USB Device Driver" if you
want to connect ovens via the USB
interface.
►
In addition, you should select
"Chipcard Driver" if you want to use
a MEMoryCard XL in an external card
reader device (see page 24 ).
You can also install USB and chip card
drivers later on. To do this, restart the
installation and, in the top window,
select the components to be installed
additionally.
10. You now have the option of registering
with GLP data (GLP = good laboratory
practice) (name and company). You may
also skip this step and enter GLP data at
a later date (see page 45 ).
11. Click on "Install". Each of the installation
routines for the selected components are
now run one after another. In the same
way, carry out steps 2 to 4. Click on
"Next" each time to continue the
installation or finally to complete it.