Memmert CELSIUS 10 FDA - Manual (Page 30)

30
CELSIUS 10 FDA-Edition
6.3.1 Setting the IP address of the oven with XTADMIN
1. Connect the oven whose IP address you want to change with a standard network cable to
a free network socket and switch it on.
2. Install and run the programme XTADMIN on the installation CD. The main programme
window of XTADMIN appears.
3. Click on "SET IP" (1), a new "XTIP" window opens
4. In the window column to the left, click on the plus sign next to the name of the oven ("XT-
NANO") whose IP address you want to change and highlight the lowest entry ("XT-NANO
xxx", the name may deviate from this) (2). In the XTIP window, the preset IP address and
the name of the oven must now appear (3).
5. Enter the IP address which you want to assign to the oven (4). Make a note of the IP ad-
dress.
6. Click on "Set IP" (5) in the XTIP window. The oven is now assigned the IP address entered.
7. Close XTADMIN.
XT-NANO
2
192.168.100.100
XT-NANO xxx
1
3
4
XT-NANO-xxx
192.168.100.100
5
Now the IP address of the oven needs to be set in CELSIUS (see next page).
6.3.2 Setting the IP address in CELSIUS
8. Start CELSIUS and in the "Settings" menu, select
the item "Options". Click on "LAN".
9. Enter the IP address or DNS of the oven set in
XTADMIN and confirm this with "OK":
10. Close the window "Global Options" by clicking on
"OK".
You can now log on the oven in CELSIUS, as described
from page 25 .