MK Diamond MK-2000P - Manual (Page 4)

4
Failure to follow instructions in this manual may lead to serious injury or even death! This equipment
is to be operated by trained and qualified personnel only! This equipment is for industrial use only.
The following guidelines should always be used when operating the core drill.
• Use the right tool. Do not use a tool or attachment to do a job for which it is not recommended.
Do not alter the tool. Maintain all tools with care for the safest and best performance.
• Should any part of this drill become missing or damaged, or any component fail to perform
properly, shut off the drill and unplug the power source. Replace the missing, damaged, and/ or
failed part before resuming operations.
DANGER
RULES FOR SAFE OPERATION
• This equipment should not be operated by persons under 18 years of age.
GENERAL SAFETY
• NEVER operate this equipment without proper protective clothing, shatterproof
glasses, steel-toed boots and other protective devices required by the job.
• NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.
• NEVER operate this equipment under the influence of drugs or alcohol.
• Whenever necessary, replace nameplate, operation and safety decals when they be come difficult
to read.
• ALWAYS check the machine for loose bolts before starting.
• ALWAYS wear proper respiratory, head, ear and eye protection
equipment when operating this machine.
• ALWAYS store equipment properly when it is not being used. Equipment should be stored in a
clean, dry location out of the reach of children.
• ALWAYS insure that the switch is off before plugging unit into electrical power.
• NEVER leave the drill running unattended. Turn power off.
• DO NOT over reach, maintain control. Keep proper footing and balance at all times. Maintain a
firm grip.
• DO NOT operate or service this equipment before reading this entire manual.
Read and understand all warnings, instructions and controls on the machine.
MK-2000P SAFETY