MK Diamond MK-2000P - Manual (Page 5)

5
• ALWAYS wear proper respiratory, head, ear and eye protection
equipment when operating this machine.
SAFETY MESSAGE / ALERT SYMBOLS
A safety message alerts you to potential hazards that could hurt you or others. Each safety message is
preceded by a safety alert symbol ( ) and one of three words: DANGER, WARNING, or CAUTION.
DANGER
You WILL be KILLED or SERIOUSLY INJURED if you do not follow directions.
WARNING
You CAN be KILLED or SERIOUSLY INJURED if you do not follow directions.
CAUTION
CAUTION
You CAN be INJURED if you do not follow directions. It may also be used to alert against
unsafe practices.
NOTICE
You can cause PROPERTY DAMAGE to your machine if you don’t follow directions.
Each message tells you what the hazard is, what can happen, and what you can do to avoid or
reduce injury. Other important messages are preceded by the word NOTICE.
The safety labels should be periodically inspected and cleaned by the user to maintain good legibility
at a safe viewing distance. If the label is worn, damaged or illegible, it should be replaced. Contact
MK Diamond or your dealer for replacement.
Always keep alert. Do not allow familiarity (gained from frequent use) to cause a careless mistake. Always
remember that a careless fraction of a second is sufficient to inflict serious injury.
MK-2000P SAFETY
HAzARD SYMBOLS
NEVER touch electrical wires or components while the engine is running. They can be
sources of electrical shock which could cause severe injury or burns.
ELECTRICAL SHOCK
Keep hands, feet, hair, and clothing away from all moving parts to prevent injury. Never
operate the motor with covers, shrouds, or guards removed.
ROTATING PARTS
on
ACCIDENTAL STARTS
Before starting the equipment, be sure the ON/OFF switch is in the “OFF” position to pre-
vent accidental starting. Place the ON/OFF switch in the OFF position before performing
any service operation.