MMF POS VAL-u LinePLUS Series - Manual (Page 3)

VAL- u LinePLUS User Manual
Last Revision 7/6/2010
2
Getting Started
 Prepare a location for the cash drawer by selecting a secured, leveled surface that is no
smaller than the cash drawer.
 Operating temperature should be controlled at 20° F to 100°F (-7° C to 37°C).
 Position the cash drawer and remove any packing tape or guards from the tray.
 If mounting under a counter, please use the VAL- u LinePLUS Under-Counter
Mounting Bracket ( P/N: 225-1430-04 ). Follow instructions detailed in this manual under
Optional Accessories on Page 4.
Lock Type / Functions
The VAL- u LinePLUS cash drawer is designed with standard 4-position locks. Each cash
drawer is equipped with one (1) set of 2 keys. The lock provides the following functions:
 12 o’clock position – Electronically ON
 3 o’clock position – Locked Open
 9 o’clock position- Locked Closed
To manually open the cash drawer turn the key 45 degrees to the right. To avoid the possibility
of losing, damaging, or breaking the key from the lock during transactions, please place lock in
the 12 o’clock position and remove key.
Media Storage
There are two (2) tray compartments located under the cash tray that serve as media
storage. The compartments are equipped with swapping dividers for any desired
configuration.
.
Printer-Driven Interface Connection
(Separate purchase necessary)
The printer-driven Interface has been designed to use the VAL- u LinePLUS with a
variety of POS printers by connecting printer specific cables.
 Connect one side of the corresponding printer-specific MMF RJ-12 Cable to the
interface connection located under the cash drawer. The end of the cable that has
a label with the MMF cable part number will plug into the Cash Drawer and the
end that has a label that reads: “Connect to Printer” would plug into the receipt printer.
 Follow the set-up instructions from the printer manufacturer to properly connect the cash
drawer to the receipt printer.