MotorGuide Tour Series - Manual (Page 13)

PRODUCT INSTALLATION
eng
9
Tour Gator 21 Spring Mount Installation
NOTE: This bow mount installation procedure applies to the Gator
20.8 Breakaway mount (pictured), the Tour Gator 21 Spring mount,
and the Tour Gator 24 Spring XL mount.
IMPORTANT: Choose an area on the deck that provides 7.6 cm
(3 in.) clearance from the bow of the boat for all motor positions,
including deployed and stowed positions.
1. Select an appropriate area on the deck of the boat to install
the mount. Ensure the forward mounting screws will not
penetrate the hull.
41280
Mount on deck with a 7.6 cm (3 in.) clearance
2. Place the bow mount base on the surface of the boat deck.
Use the bow mount base as a template to mark the locations
of the front mounting holes in the plastic decket and the rear
mounting holes on the mount base.
38097
Mount base mounting holes