MotorGuide Tour Series - Manual (Page 22)

TROLLING MOTOR OPERATION
18
eng
Match the cable connector to the sonar port on the back of the
sonar display. Power up the unit to ensure the sonar cable is
connected securely.
41478
Lowrance 7 pin sonar connector
Stowing and Deploying the Trolling Motor
!
WARNING
Rotating propellers can cause serious injury or death. Never start
or operate the motor out of water.
!
CAUTION
Moving parts, such as hinges and pivot points, can cause serious
injury. Keep away from moving parts when stowing, deploying,
or tilting the motor.
NOTE: The bow mount stowing and deploying procedures apply
to the Gator 20.8 Breakaway mount (pictured), Tour Gator 21
Spring mount, and Tour Gator 24 Spring mount.
STOWING THE TROLLING MOTOR
NOTE: Secure trolling motors with a trolling motor tie‑down strap
(not included) on all mounts.
Recommended MotorGuide Accessory Description Part Number
Trolling Motor Tie‑Down Strap MGA507A1
1. Firmly grasp the mount rope handle.
2. Snap the mount rope handle to disengage the lockslide pin.