MotorGuide Tour Series - Manual (Page 29)

MAINTENANCE AND STORAGE
eng
25
EVERY 100 HOURS OF USE OR ANNUALLY
• Periodically lubricate all the pivot points with a nonaerosol,
nonsolvent based lubricant.
IMPORTANT: Never use an aerosol lubricant to grease or oil any
part of the unit. Many aerosol lubricants contain harmful
propellants that can cause damage to various parts of the trolling
motor.
Pivot points
a - Rear deck channel grooves
b - Lockslide pin
c - Door knob shaft
d - Forward deck channel grooves
Tube
Ref No.
Description Where Used Part No.
95
2-4-C with
Teflon
Pivot points 92-802859A 1
• Check the tightness of bolts, nuts, and other fasteners.
• Inspect the battery. Refer to Battery Inspection.
Storage Preparation
The major consideration in preparing your trolling motor for storage
is to protect it from corrosion and damage caused by freezing of
trapped water.
c
d
a
41572
b