MTS Series 793 Application - Manual (Page 161)

Add Processes to the Procedure Table
MTS MultiPurpose TestWare® Creating a Practice Test Procedure 161
Otherwise, you can still benefit by reading about how to create the practice test
procedure without performing the activities on your workstation.
Add Processes to the Procedure Table
To complete this task, perform the following:
• Select MultiPurpose TestWare and display the MPT Procedure Editor.
• Add processes to the procedure table.
• Add processes to the group table.
1. Access MultiPurpose TestWare.
A. Select the simulation mode by launching the Demo System Loader
application (Start > Programs > MTS 793 Software > Tools > Demo
System Loader).
B. Launch the Station Manager application.
C. Select MultiPurpose TestWare from the Applications menu.
D. Click the procedure table icon to display the procedure table and
Process Palette.
2. Add the first process to the procedure table.
A. Drag the icon from the Process Palette to the procedure table.
B. Click the Segment Command process name in the procedure table and
rename it “Ramp to Mean”.
This step adds the first
process to the procedure
table.