MTS Series 793 Application - Manual (Page 21)

The MultiPurpose TestWare Interface
MTS MultiPurpose TestWare® About MultiPurpose TestWare 21
The MultiPurpose TestWare Interface
About the MPT User Interface
When you have an existing station configuration open with the Station Manager
application, then select MultiPurpose TestWare from the Applications menu,
the display changes and appears as shown.
• The MPT control panel provides access to all the functions needed to create,
edit, and run procedures for the current station configuration.
• The run, stop, and hold controls pertain to procedures.
• Also, if the current procedure includes an Operator Event process, a special
panel appears in the initial display.
Note When you select MPT this way, you can create, edit, and run
procedures. You can also select an ‘edit only’ instance of MPT
(Applications > MultiPurpose TestWare (Edit Only)) to run one
procedure while editing other procedures.