MTS Series 793 Application - Manual (Page 29)

The MultiPurpose TestWare Interface
MTS MultiPurpose TestWare® About MultiPurpose TestWare 29
MPT Specimen Panel
The Specimen panel displays the current MPT specimen selection and the
Procedure Name and Procedure State associated with the selected specimen. In
addition, you can use this panel to navigate to other MPT specimens displayed in
the Specimen list.
MPT Specimen Panel (part 1 of 2)
I TEM D ESCRIPTION
Specimen Displays the MPT specimen that is linked to the procedure.
You can select the desired MPT specimen from the Specimen list or click
to create a new MPT specimen.
Use the up and down scroll arrows to select an available MPT specimen from
the list. You can rename the selected MPT specimen (if you are in edit mode)
by typing over the folder name in the Specimen box.
Note New MPT specimens that are created using the new specimen icon are
assigned names that are based on a default root name (for example,
“spec”) with an incremental number suffix. The default root can be
changed with the Project Manager application.
Note To cut, copy, paste, or delete the displayed MPT specimen name,
right-mouse click on the current MPT specimen name and select the
desired right-mouse menu item.