MTS Series 793 Application - Manual (Page 290)

MTS MultiPurpose TestWare®
Max/Min Acquisition Process
Data Acquisition Process Descriptions 290
Max/Min Acquisition Parameter Descriptions
Acquisition tab
Acquisition Tab
I TEM D ESCRIPTION
Master Signal Specifies the signals that are monitored by the max/min detector.
When you select All Included Signals (default), the process monitors all
included signals for their maximum and minimum values (as selected). When
detected, the process compares them to the maximum and minimum values
currently stored. If the new values exceed the stored values, they take their
place.
When you select an individual master signal, the process monitors the signal
for its maximum and minimum values (as selected). When detected, the
process samples the values of the other included signals. When data is written
to disk, the master signal values are absolute maximum and minimum values,
while the other included signals reflect their values at the time the master
signal’s maximum and minimum values were detected.
Maximum Values Causes the process to monitor the master signal selection for maximum values.
Minimum Values Causes the process to monitor the master signal selection for minimum values.