MTS Series 793 Application - Manual (Page 299)

Level Crossing Acquisition Process
MTS MultiPurpose TestWare® Data Acquisition Process Descriptions 299
Output units tab
For more information
See “About Buffers” on page 272.
See “About Station Signals” on page 276.
How to Define a Level Crossing Acquisition Process
1. Drag the icon from the Process Palette to your procedure table.
2. Click the process icon in the procedure table or navigation pane.
3. In the parameters window, click the Acquisition tab.
4. In the Master Signal list, click the signal you want to monitor with this
process.
5. In the Level Increment box, set the units of measurement, and then type a
value.
6. Optional—If you want to specify the number of samples to be acquired,
select the Total Samples box. Otherwise it will acquire data as long as the
process is active.
7. Click the Signals tab.
8. Move all the signals you want to monitor to the Included list. Move all the
others to the Available list.
Note The order of the signals in the Included list determines the order of the
columns of data in your data file.
9. Click the Destination tab.
Output Units Tab
I TEM D ESCRIPTION
UAS Specifies the unit assignment set that will be applied to acquired data.
Select Other Displays other existing unit assignment sets from which you can choose a
UAS. This button is enabled only when you select the Other Unit Assignment
Set option.
Edit Opens the Unit Assignment Set Editor so you can modify a unit assignment
set.