MTS Series 793 Application - Manual (Page 360)

MTS MultiPurpose TestWare®
Operator Event Process
Event Process Descriptions 360
Operator Event Parameter Descriptions
Settings tab
Settings Tab
I TEM D ESCRIPTION
Button ID Selects one of four operator event buttons.
Button Label Assigns a label to the button that appears on the MPT control panel (10-
character maximum).
Description Assigns the operator event message that is displayed next to the operator event
button on the MPT control panel.
You may type as much text as you like in the Description box, but the MPT
control panel can display only one line of text, so type the information you
want the operator to see first at the beginning of your message (you can resize
the MPT control panel to expand the viewing area, but it will still display only
one line).
When you enable the Log Message As control (on the Options tab), the entire
text in the Description box is entered in the MPT Specimen Log when the
process completes or triggers.
Also, pressing Enter (on the keyboard) when typing in the Description box
causes the cursor to return to the next line in the box (analogous to a carriage
return). However, when the message is displayed in the MPT control panel, a
space will appear wherever the Enter key was pressed so that the text appears
on one line. When displayed in the Message Log or Print Preview displays,
however, the message will appear as entered in the Description box.