MTS Series 793 Application - Manual (Page 438)

MTS MultiPurpose TestWare®
Auto Offset Process
Other Process Descriptions 438
Auto Offset Parameter Descriptions
Signals tab Displays the channels available to this process. Use the arrow keys to move
channels from the Available list to the Included list.
Settings tab
Allows you to select how the process will respond to an error. Stop the test and
report the error is selected by default. You can change it to Log the error and
continue the test.
General tab
General Tab
I TEM D ESCRIPTION
Name Specifies the process name displayed in the Procedure or Group process window.
Process Enabled Enables the process. (Clear this box to disable the process.)
Execute Process Specifies the number of times the process will be run.
Counter Type Enables a process counter.
Options are None, Transient, or Fixed. Transient counters are displayed only when the
process is active. Fixed counters are displayed throughout the test.
Counter Label Names the counter.
When you run the test, this name appears under Sequence Counters on the MPT
control panel.
Note If this box is blank, the process name is used as the counter label.